<?xml version="1.0" encoding="UTF-8"?>
<metadata>
  <idinfo>
    <citation>
      <citeinfo>
        <origin>Federal Emergency Management Agency</origin>
        <pubdate>20120514</pubdate>
        <title>TERRAIN, Upper Sangamon River, IL</title>
        <geoform>FEMA-DCS-Terrain</geoform>
        <pubinfo>
          <pubplace>Washington, DC</pubplace>
          <publish>Federal Emergency Management Agency</publish>
        </pubinfo>
        <onlink>http://hazards.fema.gov</onlink>
        <lworkcit>
          <citeinfo>
            <origin>Federal Emergency Management Agency</origin>
            <pubdate>20120514</pubdate>
            <title>FEMA CASE 12-05-0737S</title>
          </citeinfo>
        </lworkcit>
      </citeinfo>
    </citation>
    <descript>
      <abstract>Ground Control is collected throughout the AOI for use in the processing of LiDAR data to ensure data accurately represents the ground surface.  QA/QC checkpoints, (FVA and CVA - see Ground Control process step for further information) also collected throughout the AOI, are used for independent quality checks of the processed LiDAR data.
LiDAR acquisition products include Pre- and Post- flight reports which contain information on the flightlines, equipment parameters, and other pertinant acquisition details.  The LiDAR product is considered to be point cloud data and consists of 1500mx1500m tiles of LAS points which are partially classified such that the bare earth points can be calibrated to the ground surface and tested via the independent QC to ensure the ground surface is accurately represented.
The Bare Earth deliverables consists of tiles of fully classified LAS points.  A full narrative accompanies this deliverable, as well as the independent QC report.</abstract>
      <purpose>Provide high resolution terrain elevation and land cover elevation data. Terrain data is used to represent the topography of a watershed and/or floodplain environment and to extract useful information for hydraulic and hydrologic models.</purpose>
    </descript>
    <timeperd>
      <timeinfo>
        <sngdate>
          <caldate>20125141</caldate>
        </sngdate>
      </timeinfo>
      <current>MIP Submission Date</current>
    </timeperd>
    <status>
      <progress>Complete</progress>
      <update>Unknown</update>
    </status>
    <spdom>
      <bounding>
        <westbc>-89.574635</westbc>
        <eastbc>-89.207407</eastbc>
        <northbc>39.853834</northbc>
        <southbc>39.724709</southbc>
      </bounding>
    </spdom>
    <keywords>
      <theme>
        <themekt>ISO 19115 Topic Category</themekt>
        <themekey>elevation</themekey>
      </theme>
      <theme>
        <themekt>FEMA NFIP Topic Category</themekt>
        <themekey>Land Surface</themekey>
        <themekey>Topography</themekey>
        <themekey>Digital Terrain Model</themekey>
        <themekey>Elevation Data</themekey>
        <themekey>LIDAR</themekey>
      </theme>
      <theme>
        <themekt>None</themekt>
        <themekey>Ground Control</themekey>
        <themekey>Point Cloud</themekey>
        <themekey>LAS Point Files</themekey>
        <themekey>Bare Earth</themekey>
      </theme>
      <place>
        <placekt>None</placekt>
        <placekey>REGION V</placekey>
        <placekey>STATE IL</placekey>
        <placekey>COUNTY SANGAMON</placekey>
        <placekey>COUNTY-FIPS 167</placekey>
        <placekey>COMMUNITY SANGAMON, COUNTY OF</placekey>
        <placekey>FEMA-CID 17167C</placekey>
        <placekey>HYDROLOGIC UNIT 07130006</placekey>
        <placekey>Upper Sangamon Watershed</placekey>
      </place>
      <place>
        <placekt>None</placekt>
        <placekey>REGION V</placekey>
        <placekey>STATE IL</placekey>
        <placekey>COUNTY SANGAMON</placekey>
        <placekey>COUNTY-FIPS 167</placekey>
        <placekey>COMMUNITY RIVERTON, VILLAGE OF</placekey>
        <placekey>FEMA-CID 170603</placekey>
      </place>
      <place>
        <placekt>None</placekt>
        <placekey>REGION V</placekey>
        <placekey>STATE IL</placekey>
        <placekey>COUNTY CHRISTIAN</placekey>
        <placekey>COUNTY-FIPS 021</placekey>
        <placekey>COMMUNITY CHRISTIAN, COUNTY OF</placekey>
        <placekey>FEMA-CID 17021C</placekey>
      </place>
      <place>
        <placekt>None</placekt>
        <placekey>REGION V</placekey>
        <placekey>STATE IL</placekey>
        <placekey>COUNTY MACON</placekey>
        <placekey>COUNTY-FIPS 115</placekey>
        <placekey>COMMUNITY MACON, COUNTY OF</placekey>
        <placekey>FEMA-CID 17115C</placekey>
      </place>
    </keywords>
    <accconst>None</accconst>
    <useconst>Acknowledgement of FEMA would be appreciated in products derived from these data.  This digital data is produced for the purposes of updating/creating a DFIRM database.</useconst>
    <datacred>Ground control and quality control checkpoints were collected by CompassData, Inc. LiDAR was acquired and processed by Continental Mapping, Inc. Quality Control testing was performed by CompassData, Inc. Quality Assurance testing was conducted by Greenhorne &amp; O'Mara, Inc.  All firms were under contract to STARR, A Joint Venture which held the FEMA contract and task order for this work.</datacred>
  </idinfo>
  <dataqual>
    <logic>Survey data have been confirmed to be in proper units, coordinate systems and format.  The terrain data have been confirmed as complete LAS format data files.  Header files are in proper LAS format with content as specified by FEMA Procedural Memo No. 61.</logic>
    <complete>Survey data have been checked for completeness, points have been collected in correct vegetation units, and distributed throughout the AOI. No gaps as defined by FEMA Procedural Memo No. 61 are known to exist within the dataset.</complete>
    <posacc>
      <vertacc>
        <vertaccr>Deliverables were tested by for both vertical and horizontal accuracy.  The vertical unit of the data file is in feet with 2-decimal point precision.</vertaccr>
        <qvertpa>
          <vertaccv>0.200</vertaccv>
          <vertacce>Consolidated Vertical Accuracy (CVA) equal to the 95th percentile confidence level (RMSE[z] x 1.9600) calculated against the bare earth surface in all ground cover classes.  Reported in meters. The point cloud surface was also tested in open terrain.  The Fundamental Vertical Accuracy (FVA) equal to the 95th Percentile confidence level (RMSE[z] x 1.9600) calculated in open terrain is 0.066 meters.  Accuracy statement is based on the area of moderate to flat terrain.  Diminished accuracies are to be expected in areas of rugged terrain and/or dense vegetation.  The accuracy of derived products may be less accurate in areas of dense vegetation due to a lesser number of points defining the bare-earth in these areas.</vertacce>
        </qvertpa>
      </vertacc>
    </posacc>
    <lineage>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Sangamon_GroundControl</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other1</srccitea>
        <srccontr>Control points for tying LiDAR data to the ground surface.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Sangamon_FVA_CVA</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other2</srccitea>
        <srccontr>Quality Assurance points to confirm LiDAR data meets vertical accuracy requirements.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Sangamon_Collection_Area</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other3</srccitea>
        <srccontr>Shapefile of Sangamon LiDAR acquisition area.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>All_Returns</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other4</srccitea>
        <srccontr>Point Cloud LAS point files named acoording to Sangamon Tile Index.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Sangamon_PreFlightReport</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other5</srccitea>
        <srccontr>Document contains the operations plans for the LiDAR acquisition.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Sangamon_PostFlightReport</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other6</srccitea>
        <srccontr>Document contains the acquisition and calibration report for the LiDAR acquisition</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Sangamon_Tile_Index</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other7</srccitea>
        <srccontr>Shapefile of tile index used to populate and reference the LAS tiled data.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Region 5 Sangamon Testing Results FVA CVA</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other8</srccitea>
        <srccontr>Document contains QC test results for both FVA and CVA blind checkpoint tests against the bare earth surface generated from the Bare Earth LAS points.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>R5_Sangamon_Terrain_TSDN</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>MIP Submission Date</srccurr>
        </srctime>
        <srccitea>Other9</srccitea>
        <srccontr>Contains complete narrative on the acquisition and processing of the LiDAR dataset, includes area diagrams, reports and metadata.</srccontr>
      </srcinfo>
      <srcinfo>
        <srccite>
          <citeinfo>
            <origin>STARR</origin>
            <pubdate>2012</pubdate>
            <title>Bare_Earth</title>
          </citeinfo>
        </srccite>
        <typesrc>DIGITAL</typesrc>
        <srctime>
          <timeinfo>
            <sngdate>
              <caldate>20120514</caldate>
            </sngdate>
          </timeinfo>
          <srccurr>ground condition</srccurr>
        </srctime>
        <srccitea>Other10</srccitea>
        <srccontr>Bare Earth LAS point files named according to the Sangamon Tile Index.</srccontr>
      </srcinfo>
      <procstep>
        <procdesc>GPS based surveys were utilized to support both processing and testing of LiDAR data within FEMA designated Areas of Interest (AOIs).  Geographically distinct ground points were surveyed using GPS technology throughout the AOIs to provide support for three distinct tasks.
Task 1 was to provide Vertical Ground Control to support the aerial acquisition and subsequent bare earth model processing.  To accomplish this, survey-grade Trimble R-8 GPS receivers were used to collect a series of control points located on open areas, free of excessive or significant slope, and at least 5 meters away from any significant terrain break.  Most if not all control points were collected at street/road intersections on bare level pavement.
Task 2 was to collect Fundamental Vertical Accuracy (FVA) checkpoints to evaluate the initial quality of the collected point cloud and to ensure that the collected data was satisfactory for further processing to meet FEMA specifications.  The FVA points were collected in identical fashion to the Vertical Ground Control Points, but segregated from the point pool to ensure independent quality testing without prior knowledge of FVA locations by the aerial vendor.
Task 3 was to collect Consolidated Vertical Accuracy CVA) checkpoints to allow vertical testing of the bare-earth processed LiDAR data in different classes of land cover, including:  Open (pavement, open dirt, short grass), High Grass and Crops, Brush and Low Trees, Forest, Urban.  CVA points were collected in similar fashion as Control and FVA points with emphasis on establishing point locations within the predominant land cover classes within each AOI or Functional AOI Group.  In order to successfully collect the Forest land cover class, it was necessary to establish a Backsight and Initial Point with the R8 receiver, and then employ a Nikon Total Station to observe a retroreflective prism stationed under tree canopy. This was necessary due to the reduced GPS performance and degradation of signal under tree canopy.
The R-8 receivers were equipped with cellular modems to receive real-time correction signals from the Keystone Precision Virtual Reference Station (VRS) network encompassing the Region 1 AOIs.  Use of the VRS network allowed rapid collection times (~3 minutes/point) at 2.54 cm (1 inch) initial accuracy. 
All points collected were below the 8cm specification for testing 24cm, Highest category LiDAR data.  To ensure valid in-field collections, an NGS monument with suitable vertical reporting was measured using the same equipment and procedures used for Control, FVA and CVA points on a daily basis.  The measurement was compared to the NGS published values to ensure that the GPS collection schema was producing valid data and as a physical proof point of quality of collection.  Those monument measurements are summarized in the Accuracy report included in the data delivered to FEMA.
20 FVA points and 51 additional CVA points across the group of AOIs were collected.  20 FVA points are necessary to allow testing to CE95  ? 1 point out of 20 may fail vertical testing and still allow the entire dataset to meet 95% accuracy requirements.In similar fashion, a minimum of 20 CVA points are necessary to test to CE95 as discussed above.    
The following software packages and utilities were used to control the GPS receiver in the field during data collection, and then ingest and export the collected GPS data for all points:  Trimble Survey Controller, Trimble Pathfinder Office.
The following software utilities were used to translate the collected Latitude/Longitude Decimal Degree HAE GPS data for all points into Latitude/Longitude Degrees/Minutes/Seconds for checking the collected monument data against the published NGS Datasheet Lat/Long DMS values and into UTM NAD83 Northings/Eastings:  U.S. Army Corps of Engineers CorpsCon, National Geodetic Survey Geoid09NAVD88.
MSL values were determined using the most recent NGS-approved geoid model to generate geoid separation values for each Lat/Long coordinate pair.  In this fashion, Orthometric heights were determined for each Control, FVA and CVA point by subtracting the generated Geoid Separation value from the Ellipsoidal Height (HAE) for publication and use as MSL NAVD88(09).</procdesc>
        <procdate>20120101</procdate>
      </procstep>
      <procstep>
        <procdesc>Using an Optech Gemini LiDAR sensor (serial number 08SE235), 26 flight lines of highest density (Nominal Pulse Spacing of 1.0m) were collected over the approximately 74 square mile project area.  The project required one flight mission and was flown on December 24th, 2011.  One airborne global positioning system (GPS) base station was used to support the LiDAR acquisition.  The Base Station was located at Abraham Lincoln Capital Airport in Springfield, IL.  The Base Station documentation can be found in the Post-Flight Aerial Acquisition Report.</procdesc>
        <procdate>20120101</procdate>
      </procstep>
      <procstep>
        <procdesc>Raw airborne GPS and IMU data were extracted from Applanix CARD.  The GPS and IMU data was post processed using POSPac MMS by Applanix.  Pairing the aircraft?s raw trajectory data with the stationary GPS base station data, this software yields a Smoothed Best Estimate of Trajectory (an ?SBET?, in POSPac?s .out file format). This file is necessary for DASHMap?s post processing software to develop the resulting geo-referenced point cloud from the LiDAR missions. The point cloud is the mathematical three dimensional composite of all returns from all laser pulses as determined from the aerial mission.  At this point this data is ready for analysis, classification, and filtering to generate a bare earth surface model in which the above ground features are removed from the data set. The GeoCue and TerraScan software packages are then used for the automated data classification. Project specific macros are created to classify the ground and to remove the side overlap between parallel flight lines. LAS Class 2 (Ground) is used to check the surveyed control points against the Triangulated LIDAR surface. Any bias is then removed using macro functionality within TerraScan. Unclassified Point Cloud tiles (1500m X 1500m) are then created using TerraScan macro functionality. These tiles are populated within GeoCue to ensure correct LAS versioning and LAS Header information. LAS Class 2 is used to check the independent QC points against the Triangulated LiDAR surface. If RMSE is not within guidelines TerraScan software is utilitzed to remove any bias, and the check is performed again.</procdesc>
        <procdate>20120101</procdate>
      </procstep>
      <procstep>
        <procdesc>Point Cloud data is manually reviewed and any remaining artifacts are removed using functionality provided within the TerraScan and TerraModeler software packages.
        Additional project specific macros are created and run within GeoCue/TerraScan to ensure correct LAS classification prior to project delivery. Final Classified LAS 
        tiles are created within GeoCue to confirm correct LAS versioning and header information.  In-house software is then used to check LAS header information and final 
        LAS classification prior to delivery.  LAS Class 2 is used to check the independent QC points against the Triangulated LiDAR surface.
        
        Upper Sangamon Classified LiDAR ASPRS Classifications
        1	Unclassified
        2	Ground
        7	Low Point (Noise)
        8	Model Key-point (Mass Point)
        9	Water
        11	Withheld</procdesc>
        <procdate>20120101</procdate>
      </procstep>
    </lineage>
  </dataqual>
  <spref>
    <horizsys>
      <planar>
        <gridsys>
          <gridsysn>Universal Transverse Mercator</gridsysn>
          <utm>
            <utmzone>16</utmzone>
            <transmer>
              <sfctrmer>0.999600</sfctrmer>
              <longcm>-87.000000</longcm>
              <latprjo>0.000000</latprjo>
              <feast>500000.000000</feast>
              <fnorth>0.000000</fnorth>
            </transmer>
          </utm>
        </gridsys>
        <planci>
          <plance>coordinate pair</plance>
          <coordrep>
            <absres>0.000010</absres>
            <ordres>0.000010</ordres>
          </coordrep>
          <plandu>meters</plandu>
        </planci>
      </planar>
      <geodetic>
        <horizdn>North American Datum 1983</horizdn>
        <ellips>Geodetic Reference System 80</ellips>
        <semiaxis>6378137.00</semiaxis>
        <denflat>298.257222</denflat>
      </geodetic>
    </horizsys>
    <vertdef>
      <altsys>
        <altdatum>North American Vertical Datum of 1988</altdatum>
        <altres>0.01</altres>
        <altunits>feet</altunits>
        <altenc>Attribute values</altenc>
      </altsys>
    </vertdef>
  </spref>
  <eainfo>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Sangamon_GroundControl</enttypl>
        <enttypd>Ground Control Survey for LiDAR collection</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Sangamon_FVA_CVA</enttypl>
        <enttypd>Survey for Horizontal and Vertical LiDAR QC</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Sangamon_Collection _Area</enttypl>
        <enttypd>Area Spatial File</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\All_Returns</enttypl>
        <enttypd>LAS 1.2 files</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Sangamon_PreFlightReport</enttypl>
        <enttypd>Digital Document</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Sangamon_PostFlightReport</enttypl>
        <enttypd>Digitial Document</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Sangamon_Tile_Index</enttypl>
        <enttypd>Area Spatial File</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\Region 5 Sangamon Testing Results FVA CVA</enttypl>
        <enttypd>Digital Document</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\SupplementalData\R5_Sangamon_Terrain_TSDN</enttypl>
        <enttypd>Digital Document</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <detailed>
      <enttyp>
        <enttypl>Terrain\2149746\Bare_Earth</enttypl>
        <enttypd>LAS 1.2 files</enttypd>
        <enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix M: Data Capture Standards and Data Capture Guidelines (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
      </enttyp>
    </detailed>
    <overview>
      <eaover>The Terrain data package is made up of several data themes containing primarily spatial information. These data supplement the Elevation datasets by providing additional information to aid flood risk evaluation and flood hazard area delineations.</eaover>
      <eadetcit>Appendix M of FEMA Guidelines and Specifications for FEMA Flood Hazard Mapping Partners contains a detailed description of the data themes and references to other relevant information.</eadetcit>
    </overview>
  </eainfo>
  <distinfo>
    <distrib>
      <cntinfo>
        <cntorgp>
          <cntorg>Federal Emergency Management Agency Engineering Library</cntorg>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing address</addrtype>
          <address>Marie Sparrow, Zimmerman Associates, Inc.</address>
          <address>847 South Pickett Street</address>
          <city>Alexandria</city>
          <state>Virginia</state>
          <postal>22304</postal>
          <country>USA</country>
        </cntaddr>
        <cntvoice>1-877-336-2627</cntvoice>
        <cntemail>miphelp@riskmapcds.com</cntemail>
      </cntinfo>
    </distrib>
    <distliab>No warranty expressed or implied is made by FEMA regarding the utility of the data on any other system nor shall the act of distribution constitute any such warranty.</distliab>
    <stdorder>
      <digform>
        <digtinfo>
          <formname>FEMA-DCS-Terrain</formname>
        </digtinfo>
        <digtopt>
          <onlinopt>
            <computer>
              <networka>
                <networkr>http://hazards.fema.gov</networkr>
              </networka>
            </computer>
          </onlinopt>
        </digtopt>
      </digform>
      <fees>Contact Distributor</fees>
    </stdorder>
  </distinfo>
  <metainfo>
    <metd>20120514</metd>
    <metc>
      <cntinfo>
        <cntperp>
          <cntper>FEMA Representative</cntper>
          <cntorg>Federal Emergency Management Agency</cntorg>
        </cntperp>
        <cntaddr>
          <addrtype>mailing address</addrtype>
          <address>500 C Street, S.W.</address>
          <city>Washington</city>
          <state>District of Columbia</state>
          <postal>20472</postal>
          <country>USA</country>
        </cntaddr>
        <cntvoice>1-877-336-2627</cntvoice>
        <cntemail>miphelp@mapmodteam.com</cntemail>
      </cntinfo>
    </metc>
    <metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
    <metextns>
      <onlink>http://hazards.fema.gov</onlink>
      <onlink>http://www.epsg.org</onlink>
      <metprof>FEMA NFIP Metadata Content and Format Standard</metprof>
    </metextns>
  </metainfo>
</metadata>

