<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE metadata SYSTEM "http://www.fgdc.gov/metadata/fgdc-std-001-1998.dtd">
<metadata>
	<idinfo>
		<citation>
			<citeinfo>
				<origin>Merrick &amp; Co</origin>
				<pubdate>2012</pubdate>
				<title>LAS_one_meter</title>
				<geoform>LAS data</geoform>
				<serinfo>
					<sername>LAS_one_meter</sername>
					<issue>LAS_one_meter</issue>
				</serinfo>
				<pubinfo>
					<pubplace>Aurora, Co</pubplace>
					<publish>Merrick &amp; Co</publish>
				</pubinfo>
			</citeinfo>
		</citation>
		<descript>
			<abstract>ASPRS v1.4 final classified LAS data grouped into 12 classifications: 0 = created, never classified, 1 = Unclassified, 2 = Ground, 3 = Low Vegetation, 4 = Medium Vegetation, 5 = High Vegetation, 6 = Building, 7 = Low point (noise), 8 = Model key-point (mass point), 9 = Water, 10 = Ignored Ground (breakline proximity), 12 = Overlap. One-meter Nominal Point Spacing.</abstract>
			<purpose>unknown</purpose>
			<supplinf>LiDAR classification (ASPRS LAS 1.4)
Option A
Class 0 = Created, never classified
Class 1 = Unclassified
Class 2 = Ground
Class 3 = Low Vegetation
Class 4 = Medium Vegetation
Class 5 = High Vegetation
Class 6 = Building
Class 7 = Low point (noise)
Class 8 = Model Key-point (mass point)
Class 9 = Water
Class 10 = Ignored Ground (Breakline Proximity)
Class 12 = Overlap*
* Important to note, Merrick typically preserves the integrity of overlap points in the final ground class
for the following reasons:
Overlap points increase the density of ground features enabling:
Better vegetation penetration
Better ground classifications
Better ability to place breaklines as needed</supplinf>
		</descript>
		<timeperd>
			<timeinfo>
				<rngdates>
					<begdate>20120326</begdate>
					<begtime>unknown</begtime>
					<enddate>20120402</enddate>
					<endtime>unknown</endtime>
				</rngdates>
			</timeinfo>
			<current>ground condition</current>
		</timeperd>
		<status>
			<progress>Complete</progress>
			<update>Unknown</update>
		</status>
		<spdom>
			<bounding>
				<westbc>
-90.380811</westbc>
				<eastbc>
-89.583984</eastbc>
				<northbc>
38.664056</northbc>
				<southbc>
37.786620</southbc>
			</bounding>
		</spdom>
		<keywords>
			<theme>
				<themekt>none</themekt>
				<themekey>LIDAR</themekey>
				<themekey>DEM</themekey>
				<themekey>First Return</themekey>
			</theme>
			<place>
				<placekt>none</placekt>
				<placekey>Illinois</placekey>
			</place>
			<temporal>
				<tempkt>none</tempkt>
				<tempkey>2012</tempkey>
			</temporal>
		</keywords>
		<accconst>none</accconst>
		<useconst>unknown</useconst>
		<ptcontac>
			<cntinfo>
				<cntperp>
					<cntper>Dr Donald Luman</cntper>
					<cntorg>Illinois State Geological Survey</cntorg>
				</cntperp>
				<cntpos>Principal Geologist</cntpos>
				<cntaddr>
					<addrtype>mailing and physical address</addrtype>
					<address>615 E. Peabody Drive</address>
					<city>Champaign</city>
					<state>IL</state>
					<postal>61820</postal>
				</cntaddr>
				<cntvoice>217-244-2179</cntvoice>
				<cntemail>luman@illinois.edu</cntemail>
				<cntinst>Please refer to the distribution information section.</cntinst>
			</cntinfo>
		</ptcontac>
		<native>ArcSDE 9.1 on Oracle 9i</native>
	</idinfo>
	<dataqual>
		<attracc>
			<attraccr>The dataset was captured, attributed, and reviewed to ensure completeness and accuracy of at least 95%.</attraccr>
		</attracc>
		<logic>The dataset was captured, attributed, and reviewed to ensure completeness and accuracy of at least 95%.</logic>
		<complete>The dataset was captured, attributed, and reviewed to ensure completeness and accuracy of at least 95%.</complete>
		<posacc>
			<horizpa>
				<horizpar>N/A</horizpar>
			</horizpa>
			<vertacc>
				<vertaccr>FVA (Fundamental Vertical Accuracy) - meet or exceed 12.5cm (0.41') RMSEZ (AccuracyZ = 24.5cm
[0.80'] at the 95% confidence level)

See LIDAR report</vertaccr>
				<qvertpa>
					<vertaccv>.41 feet</vertaccv>
					<vertacce>FVA (Fundamental Vertical Accuracy) - meet or exceed 12.5cm (0.41') RMSEZ (AccuracyZ = 24.5cm [0.80'] at the 95% confidence level)

SVA (Supplemental Vertical Accuracy) - meet or exceed 36.3cm (1.19') (95th percentile)

CVA (Consolidated Vertical Accuracy) - meet or exceed 36.3cm (1.19') (95th percentile)

See LIDAR report</vertacce>
				</qvertpa>
			</vertacc>
		</posacc>
		<lineage>
			<srcinfo>
				<srccite>
					<citeinfo>
						<origin>Innovative Mapping &amp; Surveying Solutions (InMaSS)</origin>
						<pubdate>2012</pubdate>
						<pubtime>Unknown</pubtime>
						<title>ground control</title>
						<geoform>tabular digital data</geoform>
						<serinfo>
							<sername>ground control</sername>
							<issue>ground control</issue>
						</serinfo>
						<pubinfo>
							<pubplace>Zionsville, Indiana</pubplace>
							<publish>Innovative Mapping &amp; Surveying Solutions (InMaSS)</publish>
						</pubinfo>
					</citeinfo>
				</srccite>
				<typesrc>disc</typesrc>
				<srctime>
					<timeinfo>
						<sngdate>
							<caldate>2012</caldate>
						</sngdate>
					</timeinfo>
					<srccurr>publication date</srccurr>
				</srctime>
				<srccitea>ground control</srccitea>
				<srccontr>control point network to estbalish horizontal and vertical accuracy</srccontr>
			</srcinfo>
			<srcinfo>
				<srccite>
					<citeinfo>
						<origin>Merrick &amp; Co</origin>
						<pubdate>2012</pubdate>
						<title>LiDAR</title>
						<geoform>LAS data</geoform>
						<serinfo>
							<sername>LiDAR</sername>
							<issue>LiDAR</issue>
						</serinfo>
						<pubinfo>
							<pubplace>Aurora, Co</pubplace>
							<publish>Merrick &amp; Co</publish>
						</pubinfo>
					</citeinfo>
				</srccite>
				<typesrc>disc</typesrc>
				<srctime>
					<timeinfo>
						<rngdates>
							<begdate>20120326</begdate>
							<begtime>unknown</begtime>
							<enddate>20120402</enddate>
							<endtime>unknown</endtime>
						</rngdates>
					</timeinfo>
					<srccurr>ground condition</srccurr>
				</srctime>
				<srccitea>LiDAR</srccitea>
				<srccontr>surface returns used to create surface models and contours</srccontr>
			</srcinfo>
			<procstep>
				<procdesc>LIDAR data was collected using Merrick's ALS50 Phase 2 sensor.  The raw data was verified in MARS software for complete coverage of the project area, and boresighted to align the flightlines.  Raw data files were parsed into manageable client-specific tiles.  These tiles were then processed through automated filtering that separates the data into 12 different classification groups  The data was next taken into MARS to reclassify the erroneous points that may remain in the LIDAR point cloud after auto filter.</procdesc>
				<srcused>ground control</srcused>
				<srcused>LiDAR</srcused>
				<procdate>20120510</procdate>
				<proccont>
					<cntinfo>
						<cntperp>
							<cntper>Doug Jacoby</cntper>
							<cntorg>Merrick &amp; Co</cntorg>
						</cntperp>
						<cntpos>Project Manager</cntpos>
						<cntaddr>
							<addrtype>mailing and physical address</addrtype>
							<address>2450 S. Peoria St</address>
							<city>Aurora</city>
							<state>Co</state>
							<postal>80014</postal>
							<country>USA</country>
						</cntaddr>
						<cntvoice>303-353-3903</cntvoice>
						<cntemail>doug.jacoby@merrick.com</cntemail>
					</cntinfo>
				</proccont>
			</procstep>
		</lineage>
	</dataqual>
	<spdoinfo>
		<direct>Vector</direct>
		<ptvctinf>
			<sdtsterm>
				<sdtstype>G-polygon</sdtstype>
				<ptvctcnt>1</ptvctcnt>
			</sdtsterm>
		</ptvctinf>
	</spdoinfo>
	<spref>
		<horizsys>
			<planar>
				<mapproj>
					<mapprojn>Transverse Mercator</mapprojn>
					<transmer>
						<sfctrmer>0.999941</sfctrmer>
						<longcm>-90.166667</longcm>
						<latprjo>36.666667</latprjo>
						<feast>2296583.333333</feast>
						<fnorth>0.000000</fnorth>
					</transmer>
				</mapproj>
				<planci>
					<plance>coordinate pair</plance>
					<coordrep>
						<absres>.001</absres>
						<ordres>.001</ordres>
					</coordrep>
					<plandu>survey feet</plandu>
				</planci>
			</planar>
			<geodetic>
				<horizdn>D_NAD_1983_NSRS2007_StatePlane_Illinois_West_FIPS_1202_Ft_US</horizdn>
				<ellips>Geodetic Reference System 80</ellips>
				<semiaxis>6378137.000000</semiaxis>
				<denflat>298.257222</denflat>
			</geodetic>
			<cordsysn><geogcsn>GCS_NAD_1983_NSRS2007</geogcsn><projcsn>NAD_1983_NSRS2007_StatePlane_Illinois_West_FIPS_1202_Ft_US</projcsn></cordsysn></horizsys>
		<vertdef>
			<altsys>
				<altdatum>North American Vertical Datum of 1988</altdatum>
				<altres>.001</altres>
				<altunits>feet</altunits>
				<altenc>Explicit elevation coordinate included with horizontal coordinates</altenc>
			</altsys>
		</vertdef>
	</spref>
	<eainfo>
		<detailed>
			<enttyp>
				<enttypl>
LAS</enttypl>
				<enttypd>LAS</enttypd>
				<enttypds>Merrick &amp; Co</enttypds>
			</enttyp>
		</detailed>
		<overview>
			<eaover>LiDAR classification (ASPRS LAS 1.4)
Option A
Class 0 = Created, never classified
Class 1 = Unclassified
Class 2 = Ground
Class 3 = Low Vegetation
Class 4 = Medium Vegetation
Class 5 = High Vegetation
Class 6 = Building
Class 7 = Low point (noise)
Class 8 = Model Key-point (mass point)
Class 9 = Water
Class 10 = Ignored Ground (Breakline Proximity)
Class 12 = Overlap*
* Important to note, Merrick typically preserves the integrity of overlap points in the final ground class
for the following reasons:
Overlap points increase the density of ground features enabling:
Better vegetation penetration
Better ground classifications
Better ability to place breaklines as needed</eaover>
			<eadetcit>LiDAR classification (ASPRS LAS 1.4)
Option A
Class 0 = Created, never classified
Class 1 = Unclassified
Class 2 = Ground
Class 3 = Low Vegetation
Class 4 = Medium Vegetation
Class 5 = High Vegetation
Class 6 = Building
Class 7 = Low point (noise)
Class 8 = Model Key-point (mass point)
Class 9 = Water
Class 10 = Ignored Ground (Breakline Proximity)
Class 12 = Overlap*
* Important to note, Merrick typically preserves the integrity of overlap points in the final ground class
for the following reasons:
Overlap points increase the density of ground features enabling:
Better vegetation penetration
Better ground classifications
Better ability to place breaklines as needed</eadetcit>
		</overview>
	</eainfo>
	<metainfo>
		<metd>20060424</metd>
		<metc>
			<cntinfo>
				<cntperp>
					<cntper>Dr Donald Luman</cntper>
					<cntorg>Illinois State Geological Survey</cntorg>
				</cntperp>
				<cntpos>Principal Geologist</cntpos>
				<cntaddr>
					<addrtype>mailing and physical address</addrtype>
					<address>615 E. Peabody Drive</address>
					<city>Champaign</city>
					<state>IL</state>
					<postal>61820</postal>
				</cntaddr>
				<cntvoice>217-244-2179</cntvoice>
				<cntemail>luman@illinois.edu</cntemail>
				<cntinst>Please refer to the distribution information section.</cntinst>
			</cntinfo>
		</metc>
		<metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
		<metstdv>FGDC-STD-001-1998</metstdv>
		<mettc>local time</mettc>
		<metac>None.</metac>
		<metuc>None.</metuc>
		<metextns>
			<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
			<metprof>ESRI Metadata Profile</metprof>
		</metextns>
	</metainfo>
	<Esri><ModDate>20120904</ModDate><ModTime>10092900</ModTime></Esri><mdDateSt Sync="TRUE">20120904</mdDateSt></metadata>
