<!DOCTYPE metadata SYSTEM "csdgm2.dtd">
<metadata>
 <idinfo>
   <citation>
		<citeinfo>
		<origin>Quantum Spatial, Inc.</origin>
		<pubdate>20141107</pubdate>
		<title>DuPage County Illinois, LiDAR Acquisition, Bare Earth DEM</title>
		<geoform>LiDAR point cloud</geoform>
    </citeinfo>
   </citation>
  <descript>
       <abstract>Contract ID: E114-23580  Purchase Order: A19461  Quantum Spatial Project No: 1140311
	   LiDAR data collection is to produce high accuracy models of the DuPage County, Illinois in accordance with requirements outlined in the Task Order Agreement.  

       The raw LiDAR point cloud data is used to create surface models as requested; classified LiDAR LAS files, bare-earth Digital Elevation Models (DEM), Intensity raster of first return,  shapefiles of breaklines representative of surface hydro features.
	   </abstract> 
       <lidar>
		<ldrinfo>
			<ldrspec>USGS NGP Base Specification v1</ldrspec>
			<ldrsens>Leica ALS70 sensor SN7161</ldrsens>
			<ldrmaxnr>4</ldrmaxnr>
			<ldrnps>0.5</ldrnps>
			<ldrdens>4.20</ldrdens>
			<ldrfltht>3,139</ldrfltht>
			<ldrfltsp>150</ldrfltsp>
			<ldrscana>18</ldrscana>
			<ldrscanr>42</ldrscanr>
			<ldrpulsr>194</ldrpulsr>
			<ldrpulsd>2</ldrpulsd>
			<ldrpulsw>NA</ldrpulsw>
			<ldrwavel>1064</ldrwavel>
			<ldrmpia>1</ldrmpia>
			<ldrbmdiv>0.22</ldrbmdiv>
			<ldrswatw>NA</ldrswatw>
			<ldrswato>55</ldrswato>
			<ldrcrs>NAD_1983_2011_StatePlane_Illinois_West_FIPS_1202_Ft_US</ldrcrs> 
			<ldrgeoid>National Geodetic Survey (NGS) Geoid12A</ldrgeoid> 
       </ldrinfo> 
		<ldraccur> 
			<ldrchacc> 0.0</ldrchacc>
			<clsfva> 0.082</clsfva>
			<clscva>0.1311</clscva>
			<clssvas>
			<svalctyp>Urban</svalctyp> 
			<svavalue>0.0546</svavalue> 
            </clssvas>
			<clssvas>
			<svalctyp>Open Terrain</svalctyp>
			<svavalue>0.0820</svavalue>
            </clssvas>
			<clssvas>
			<svalctyp>Tall Grass/Agriculture</svalctyp>
			<svavalue>0.1106</svavalue>
            </clssvas>
			<clssvas>
			<svalctyp>Brush/Scrub/Shrub</svalctyp>
			<svavalue>0.1350</svavalue>
            </clssvas>
			<clssvas>
			<svalctyp>Woods/Forest</svalctyp>
			<svavalue>0.1710</svavalue>
            </clssvas>
		</ldraccur>
       <lasinfo>
			<lasver>1.2</lasver> 
			<lasprf>1</lasprf> 
			<laswheld>Withheld (ignore) points were identified in these files using the standard LAS Withheld bit</laswheld> 
			<lasolap> To maintain high point density overage points were not indicated by class</lasolap>
			<lasintr>8-bit</lasintr>
			<lasclass> 
			<clascode>0</clascode> 
            <clasitem>Never Processed</clasitem> 
           </lasclass>
			<lasclass>
               <clascode>1</clascode>
               <clasitem>Processed, but unclassified</clasitem>
			</lasclass>
			<lasclass>
               <clascode>2</clascode>
               <clasitem>Bare-earth, Ground</clasitem>
			</lasclass>
			<lasclass>
               <clascode>7</clascode>
               <clasitem>Noise (low or high, manually identified, if needed)</clasitem>
			</lasclass>
			<lasclass>
			<clascode>9</clascode>
               <clasitem>Water</clasitem>
			</lasclass>
			<lasclass>
               <clascode>10</clascode>
               <clasitem>Ignored ground (Breakline proximity)</clasitem>
			</lasclass>
       </lasinfo>
    </lidar>
	<purpose>This raster dataset provides high resolution terrain elevation data in the DuPage County GIS Department, 2014 DuPage County Illinois 4 ppsm LiDAR Survey project area.</purpose>
    <supplinf> 
	LiDAR has been collected and processed for all areas within the project study area. In some areas of heavy vegetation and forest cover, there may be relatively few ground points in the LiDAR data. TINing the points produces large triangles and hence the elevations may be less accurate within such areas. In some areas with large bodies of water, competing water surface levels may be visible. This is due to seasonal water level fluctuation and intervals of time between acquisition of an area.
    LiDAR flight lines have been examined to ensure that there was at least 60% sidelap, there are no gaps between flightlines, and overlapping flightlines have consistent elevation values. Shaded relief images have been visually inspected for data errors such as pits, border artifacts, gaps, and shifting.  The data were examined at a 1:3000 scale.

	4 point per meter collection rate:
			Average Point Spacing 0.5 meters
			Average Point Density  6.64 pulses per square meter
			Flying Height (Above Ground) 3,1396 meters
			Ground Speed 150 knots
			Field of View (FOV) 40 degrees
			Scan Rate Setting used 42 Hz
			Laser Pulse Rate used 194 kHz
    </supplinf>
   </descript>
   <timeperd>
		<timeinfo>
			<rngdates>
				<begdate>20140421</begdate>
				<enddate>20140505</enddate>
			</rngdates>
		</timeinfo>
		<current>ground condition</current> 
   </timeperd>
   <status>
     <progress>complete</progress> 
     <update>none</update>
   </status>
   <keywords>
       <theme>
			<themekt>None</themekt>
			<themekey>DuPage County GIS Department</themekey> 
			<themekey>QSI</themekey> 
			<themekey>LiDAR</themekey>
			<themekey>Light Detection and Ranging</themekey>
			<themekey>DEM</themekey>
			<themekey>digital terrain model</themekey>
			<themekey>topography</themekey> 
			<themekey>bare earth</themekey> 
			<themekey>high-resolution</themekey> 
			<themekey>bare ground</themekey> 
			<themekey>DTM</themekey>
       </theme>
       <place>
			<placekt>None</placekt>
			<placekey>Illinois</placekey> 
			<placekey>DuPage County</placekey>
       </place>
   </keywords>
   <accconst>No restrictions apply to accessing this data.</accconst> 
   <useconst>None. However, users should be aware that temporal changes may have occurred since this dataset was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of its limitations.</useconst>
   <ptcontac>
     <cntinfo>
       <cntorgp>
         <cntorg>Quantum Spatial, Inc.</cntorg>
         <cntper>Sonja Ellefson</cntper>
       </cntorgp>
      <cntOnlineRes>
		<linkage>http://www.quantumspatial.com</linkage>
		</cntOnlineRes>
	   <cntaddr>
         <addrtype>mailing and physical</addrtype>
         <address>4020 Technology Parkway </address>
         <city>Sheboygan</city>
         <state>WI</state>
         <postal>53083</postal>
         <country>USA</country>
       </cntaddr>
       <cntvoice>920-803-5825</cntvoice>
       <cntemail>sellefson@quantumspatial.com</cntemail> 
       <hours>Monday through Friday 8:00 AM to 4:00 PM (Central Time)</hours> 
     </cntinfo>
   </ptcontac>
   <native> Leica IPAS TC v.3.2; Leica ALS Post Processor v.2.75 Build #25; GeoCue v.2013.145.1; TerraMatch v.14; Terra Scan v.14; Terra Scan v.13; Windows XP Operating System 
   </native>
 </idinfo>
 <dataqual> 
		<logic>Data cover the entire area specified for this project.</logic>
		<complete>These data files include all data points collected.
		No points have been removed or excluded. 
		The raw point cloud is of good quality and data passes Fundamental Vertical Accuracy specifications.
		</complete>
   <posacc>
		<vertacc>
			<vertaccr>Project specifications require that vertical accuracy, as RMSE, of LiDAR data be less than 9.25 cm in open terrain. Vertical accuracy is determined by comparison of a TIN or DEM derived from the final LiDAR ground points and ground survey check point elevations. Differences are calculated to establish a RSME. 
			The vertical accuracy of the LiDAR data set meets the requirement of RMSE less than 9.25 cm and of FVA less than 18.13 cm.
			</vertaccr> 
				<qvertpa>
					<vertaccv>0.042 meters. RMSE as tested against a TIN derived from LiDAR Ground points</vertaccv>
					<vertacce> A TIN derived from the final LiDAR ground points is compared to ground survey check points. Elevation differences are calculated to establish a RMSE.</vertacce> 
				</qvertpa>
				<qvertpa>
					<vertaccv>0.082 meters. FVA as tested against a TIN derived from LiDAR Ground points</vertaccv>
					<vertacce> The FVA is tested using Open Terrain ground survey points.  The check points are compared to elevation values of a TIN derived from the final LiDAR ground points. Differences in elevations are calculated to determine a RSME. The RMSE value is multiplied by 1.96 to establish the FVA.
					</vertacce> 
				</qvertpa>
		</vertacc>
   </posacc>
   <dataLineage>
            <prcStep xmlns="">
                <stepDesc>Acquisition. 
        LiDAR data acquisition was conducted from April 21 to May 5, 2014. The survey utilized a Leica ALS70 laser system mounted in a Piper Navajo Chieftan. Near nadir scan angles were used to increase penetration of vegetation to ground surfaces. Ground level GPS and aircraft IMU were collected during the flight.</stepDesc>
                <stepDateTm>5/5/2014</stepDateTm>
            </prcStep>
            <prcStep xmlns="">
                <stepDesc>Processing.
        1. TRAJECTORY:  Aircraft trajectory (position and attitude) were calculated based on on-board GPS and IMU data with post-processing refinement through coincident static GPS collection.          
        2. POST-PROCESSING:  Laser point return coordinates (x,y,z) were computed using sensor-specific post processing software, combining LiDAR return range and intensity information with aircraft trajectory information.
        3. INITIAL QAQC:  The post-processed LiDAR files were assembled into flight lines and reviewed for gaps and consistency, as well as systematic noise.
        4. CALIBRATION:  Custom algorithms evaluated individual swaths for misalignments based on IMU configuration as well as aircraft attitude variability.  Offsets were resolved through surface and linear matching algorithms that minimize variability in elevation and slope. Descriptive statistics, thresholds, and specifications providing transparency for data calibration are discussed in the accompanying Data Report.
        5. GROUND MODELING:  Ground classified point cloud was generated through proprietary data processing tools, with settings and thresholds appropriate to landscape and vegetation condition.
		6. ARTIFACT FILTRATION:  Noise and processing artifacts were filtered using post-processing software and proprietary quality control methods.
        7. ACCURACY ASSESSMENT:  Vertical accuracy for the LiDAR dataset was assessed against Ground Check Points (GCP) distributed throughout the study area. See the accompanying Data Report for methodology, descriptive statistics, and relevant standards and reporting language.
        8. DATA PRODUCT:  LiDAR points classified as 'ground' were output as a digital elevation model (DEM).</stepDesc>
                <stepDateTm>11/7/2014</stepDateTm>
            </prcStep>
     </dataLineage>
 </dataqual>
<spdoinfo>
   <indspref>Data and models conform to the a tiling scheme of 5000 x 5000 feet.</indspref>
   <direct>Point</direct> 
   <ptvctinf>
     <sdtsterm>
       <sdtstype>Point</sdtstype> 
      </sdtsterm>
   </ptvctinf>
 </spdoinfo>
  <spref>
    <horizsys>
      <planar>
        <gridsys>
          <gridsysn>
            State Plane Coordinate System 1983
          </gridsysn>
          <spcs>
            <spcszone>
              1201 Illinois State Plane, East
            </spcszone>
           </spcs>
        </gridsys>
      </planar>
      <geodetic>
        <horizdn>
          North American Datum of 1983 (NAD83) 2011
        </horizdn>
      </geodetic>
    </horizsys>
    <vertdef>
      <altsys>
        <altdatum>North American Vertical Datum of 1988</altdatum>
        <altunits>US Survey Feet</altunits>
        <altenc>Explicit elevation coordinate included with horizontal coordinates</altenc>
      </altsys>
    </vertdef>
  </spref>
   <distinfo>
        <distrib>
            <cntinfo>
                <cntorgp>
                    <cntorg>DuPage Count GIS Department</cntorg>
                </cntorgp>
                <cntaddr>
                    <addrtype>physical</addrtype>
                    <address>Jack T. Knuepfer Bldg, 421 North County Farm Road</address>
                    <city>Wheaton</city>
                    <state>Illinois</state>
                    <postal>60187</postal>
                    <country>USA</country>
                </cntaddr>
				<cntvoice>630-407-5000</cntvoice>
       <cntOnlineRes xmlns="">
						<linkage>www.dupageco.org/gis</linkage>
					</cntOnlineRes>
            </cntinfo>
        </distrib>
        <distliab>This dataset was contracted by DuPage Count GIS Department. Information regarding the use of this dataset should be directed to the owner.</distliab>
    </distinfo>
	<metainfo>
        <metd>11/7/2014</metd>
        <metc>
            <cntinfo>
                <cntorgp>
                    <cntorg>Quantum Spatial, Inc. </cntorg>
                </cntorgp>
                <cntaddr>
                    <addrtype>mailing and physical</addrtype>
                    <address>4020 Technology Parkway</address>
                    <city>Sheboygan</city>
                    <state>WI</state>
                    <postal>53083</postal>
                    <country>USA</country>
                </cntaddr>
                <cntvoice>1-920-803-5825</cntvoice>
            </cntinfo>
        </metc>
        <metstdn>FGDC Content Standard for Digital Geospatial Metadata</metstdn>
        <metstdv>FGDC-STD-001-1998</metstdv>
        <mettc>local time</mettc>
    </metainfo>
</metadata>